Operability and Ergonomics

  • Multifunction control handle with ergonomically angled hand grips
  • Fingertip control of all functions
  • Directional thumb wheels
  • Programmable neutral speed reduction
  • Direction reverse switch on control handle
  • Turtle torque
  • Spring-loaded control handle
  • “Pinwheel” capability for right angle stacking
  • Electric disc brake
  • Emergency power disconnect
  • Battery disconnect handle
  • Electronic brake release jumper
Request A Quote
Toyota Electric Walkie Pallet Jack Image

Performance

  • 24-Volt electrical system
  • AC drive motor with thermal protection & current limiting
  • Class ‘F’ motor insulation
  • Transistor drive control system (MOSFET)
  • Controller Area Network (CAN-Bus) communication
  • Regenerative braking
  • Contactor-less drive controls
  • Electronic touchpad, keyless entry system with password protection
  • Programmable performance for up to 10 operators
  • Electronic raise and lower controls in operator handle
  • Auto-off system (programable)
  • Error indicator with self-diagnostics
  • Fault code memory with hour meter reading
  • Hour meter indicator
  • Programmable service indicator
  • Battery discharge indicator with lift interrupt
  • Anti-roll back system
  • Fused control and power circuits
  • IP65 rated electrical system

VIDEO: TOYOTA ELECTRIC WALKIE PALLET JACK

Toyota_Electric_Walkie_Pallet_Jack_Image_2

Body/Exterior Design

  • Box rail fork construction
  • Tapered fork tips with pallet entry slides
  • Polyethylene stability wear pads (reversible)
  • Teflon™ Coated Polylube™ bushings
  • Chrome-plated lift cylinder, 2″ diameter
  • Rubber drive tire, 10″ diameter x 5″
  • Polyurethane load wheels, 3.25″ diameter x 4.5″ width
  • Battery compartment 26.5″ x 7.8″ x open height
  • SB-175 battery connector (red)
  • High strength service cover with pen/pencil storage tray
  • Tool-free cover removal
  • Steel fixed pull rods
  • Electric horn
  • Stainless steel lift linkage pins
Request A Quote

 

Toyota_Electric_Walkie_Pallet_Jack_Image_3

New Equipment Guarantee

In the event you are unhappy with the equipment you purchased from ProLift after one year’s use, we will simply buy it back for the original purchase price less two thirds of our normal rental rate.

Available Options

Galvanized Chassis

Suited for customers who move materials in and out of: cold storage facilities; chemical and salt and brine industries; or in areas where frequent wash down is required to remove contaminants.

Nexsys Maintenance Free Battery/Charger Pack

A maintenance free battery pack manufactured by the company Nexsys. Comes with a built-in 24-Volt battery charger.

3" Lowered Fork Height (3,000 lb. capacity)

The lowered fork height makes it easier to get into pallets (more clearance with a shorter fork). With this option, the carrying capacity of the pallet jack drops to 3,000 lbs.

Sealed-Bearing Dual Load Wheels

Sealed bearing dual load wheels use a sealed bearing which makes them maintenance free (no need to grease). Dual wheels help in applications where turning is frequent.

Equipment Specs

Model Load Capacity* (lbs.) Max travel speed full load (MPH) Max lift speed full load (fpm) Max Gradeability full load (%) Basic right angle stack** (in.)
8HBW23 4,500 3.6 N/A 10 N/A

* Based on 24" load center | ** Add load length and clearance