• 3,000 lbs. capacity
  • 24-Volt electrical system
  • MOSFET transistor control system
  • Separately excited drive motor (SEM)
  • UL-approved model type E
  • On/off key switch
  • Programmable performance
  • Electronic raise and lower controls in operator handle
  • Manual raise and lower controls
  • Manual reach/retract and tilt controls
  • Class ‘H’ motor insulation
  • Oil-immersed powertrain
Request A Quote
Toyota Walkie Reach Truck Image

Body/Exterior Design

  • 32″ to 50″ base leg openings (inside dimensions) in 1″ increments
  • Electronic horn
  • 32.3″ x 13.3″ battery compartment
  • Rugged reach pantograph
  • 30″ wide ITA Class II fork carriage
  • 42″ fork length
  • 48″ tilting load backrest extension (3° forward / 4° backward)
  • Internal hose reeving
  • Crowned poly drive tire, 10.5″ x 5″
  • Tandem Polyurethane load wheels, 4″ x 2.875″
  • Polyurethane caster wheels, 4″ x 2.5″
  • Fully hinged steel service access door
  • Spring-loaded torsion bar suspension with automatic load-sensing adjustment and stabilizing
  • Wide view 2-stage mast (V)
  • Drive axle mounted string guards
  • Pressure overload valve & lowering control fuses


Toyota Walkie Reach Truck Image

Operability & Ergonomics

  • Emergency power disconnect switch
  • Automatic resetting circuit breaker
  • Reverse polarity protection
  • Mechanical drum brake
  • Directional thumb control
  • Safety glass mast guard
  • Direction reverse switch on control handle
  • Control handle with 8.5° ergonomic angle
  • Power on self-test with self-diagnostics
Request A Quote
Toyota Walkie Reach Truck Image

New Equipment Guarantee

In the event you are unhappy with the equipment you purchased from ProLift after one year’s use, we will simply buy it back for the original purchase price less two thirds of our normal rental rate.

Available Options

Pallet Centering Guide

Allows self-centering of the pallet on the forks.

Twist Grip Control Handle

Good for applications where heavy gloves are required to be worn by the operator.

Battery Discharge Indicator W/ Hour Meter In Combination Gauge W/ Lift Interrupt

The hour meter is replaced with a combination battery discharge indicator and hour meter with lift interrupt.

Equipment Specs

Model Load Capacity* (lbs.) Max travel speed full load (MPH) Max lift speed full load (fpm) Max Gradeability full load (%) Basic right angle stack** (in.)
6BWR15 3,000 2.8 29-60 10 91

* Based on 24" load center | ** Add load length and clearance